8 Year Exporter Cast Steel Gate Valve - Knife Gate Valve – Hongbang
8 Year Exporter Cast Steel Gate Valve - Knife Gate Valve – Hongbang Detail:
OK-202-HANDWHEEL
| NO. | PART | Choose | QTY | |
| 1 | BODY | GGG40 | 1 | |
| 2 | SEAT | EPDM/NBR | 1 | |
| 3 | GATE | SS304/SS316 | 1 | |
| 4 | RETAINER | SS304/SS316 | 2 | |
| 5 | O-RING | NBR | 5 | |
| 6 | GLAND | GGG40 | 3 | |
| 7 | STEM | SS304/SS316 | 1 | |
| 8 | LOCK NUT | BRASS | ||
| TEST PRESSURE | SHELL | SEAL | ||
| HYDROSTATIC | 1.5 MPa | 1.1 MPa | ||
| STANDARD | DESIGN CODE | EN 593 | ||
| INSPECTION & TEST | EN 12266 | |||
| END STANDARD | PN10 | |||
| FACE TO FACE | EN 558 | |||
GENERAL CHARACTERISTICS
Range : from DN 50 to DN 600.
Function ON/OFF or regulation.
Wafer threaded mounting ISO PN10.
Unidirectional tightness, direction indication thanks to the arrow on the body.
Small retention zone: the gate is guided in the body and has little clearance.
Gland assembly: packing and O-ring (same materials as seat joint) to assure the elasticity and decrease the operating torque. Small head loss. Possibilityto regulate thick fluids with the adaptation of a diaphragm ring.
STANDARDS
Manufacture according to the requirements of the European directive
2014/68/UE «Equipments under pressure» : modulate H.
On request : Product in accordance to european directive
“Potentialy explosive atmospheres” N° 94/9/EC : ATEX II 2 GD c and ATEX II 3 GD c.
Test procedures are established according to standards EN 12266-1, DIN 3230, BS 5154 and ISO 5208.
| Size | HA | HB | HC | HC | φ C | ||
| 2″/DN50 | 65 | 289 | 153 | 43 | PN10 | ||
| 2-1/2″/DN65 | 70 | 313 | 172 | 46 | PN10 | ||
| 3″/DN80 | 95 | 335 | 182 | 46 | PN10 | ||
| 4″/DN100 | 108 | 380 | 215 | 52 | PN10 | ||
| 5″/DN125 | 124 | 415 | 235 | 56 | PN10 | ||
| 6″/DN150 | 135 | 470 | 260 | 56 | PN10 | ||
| 8″/DN200 | 165 | 580 | 325 | 60 | PN10 | ||
We can meet the various needs of customers at home and abroad. We welcome new and old customers to come to consult & negotiate with us. Your satisfaction is our motivation! Let us work together to write a brilliant new chapter!
We are now looking forward to even greater cooperation with overseas customers based on mutual benefits. We will work wholeheartedly to improve our products and services. We also promise to work jointly with business partners to elevate our cooperation to a higher level and share success together. Warmly welcome you to visit our factory sincerely.
Product detail pictures:
Related Product Guide:
Attaining consumer satisfaction is our firm's purpose for good. We'll make wonderful efforts to produce new and top-quality merchandise, meet up with your special necessities and supply you with pre-sale, on-sale and after-sale products and services for 8 Year Exporter Cast Steel Gate Valve - Knife Gate Valve – Hongbang , The product will supply to all over the world, such as: Philadelphia, Muscat, Finland, We always insist on the management tenet of "Quality is First, Technology is Basis, Honesty and Innovation".We are able to develop new products continuously to a higher level to satisfy different needs of customers.
By Beryl from Poland - 2018.03.03 13:09
It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!
By Coral from UK - 2017.04.18 16:45
